Maintenance - Nordson ProBlue Flex Product Manual

E 2020 Nordson Corporation
WARNING! Allow only qualified personnel to perform the following tasks.
Follow the safety instructions in this document and all other related
documentation.
WARNING! Attempting any other maintenance procedures can result in
equipment damage, improper system operation, or personal injury.
Table 5-1 describes the preventive maintenance tasks required to keep the
melters operating within their specified limits and to prevent equipment
malfunctions. For information about maintaining optional equipment, refer to
the instructions provided with the equipment.
Table 5-1 Preventive Maintenance Tasks
Tasks
Relieving system pressure
Lockout external communications
Cleaning the melter exterior
Lubricating the piston pump
Replacing the adhesive filter
Cleaning the tank

Maintenance

Section 5
Maintenance
Frequency
Before performing any
maintenance task that requires
opening a hydraulic connection or
port
Before performing any
maintenance task
Daily
At least quarterly
As needed
S
When changing the type or
S
grade of hot melt
When changing the type or
S
grade of hot melt
When excessive charring
S
occurs
Part 1128350_02
5-1