Nordson ProBlue Flex Product Manual page 72

Installation
3-32
Connecting the Hoses
Part 1128350_02
(contd)
Figure 3-15 Hydraulic and electrical connections
1. Hydraulic connections (hose)
CAUTION! Failure to connect a hose to Port 1 may create spaces within the
manifold where hot melt will not circulate. The presence of these spaces can
result in the build-up of hot melt char, which can lead to clogged applicator
nozzles.
Save all of the port plugs removed from the manifold. A port plug will
S
need to be reinstalled into the manifold if a hose is later removed.
Use the 45- or 90-degree or straight hose fittings.
S
1
2
2. Electrical connections
(applicator)
E 2020 Nordson Corporation