Preparing the Transformer for Installation
1
Figure F-5
Preparing the transformer for installation
1. Transformer cover
E 2020 Nordson Corporation
See Figures F-5 and F-6.
1. Unfasten the two screws to remove the transformer cover.
NOTE: The cover is connected to the transformer chassis by a ground
lead.
2. Disconnect the ground lead from the transformer chassis to the ground
connection inside the transformer cover.
2
2. Transformer cover screws
ProBlue Flex 400/480 Volt Transformer
3. Transformer ground wire
F-9
3
Part 1128350_02