Maintenance And Repair Practices; Equipment Safety Information - Nordson ProBlue P4 Customer Product Manual

Maintenance and Repair Practices

Equipment Safety Information

E 2014 Nordson Corporation
S
Allow only personnel with appropriate training and experience to operate
or service the equipment.
S
Perform scheduled maintenance activities at the intervals described in
this document.
S
Relieve system hydraulic and pneumatic pressure before servicing the
equipment.
S
De‐energize the equipment and all auxiliary devices before servicing the
equipment.
S
Use only new Nordson‐authorized refurbished or replacement parts.
S
Read and comply with the manufacturer's instructions and the MSDS
supplied with equipment cleaning compounds.
NOTE: MSDSs for cleaning compounds that are sold by Nordson are
available at www.nordson.com or by calling your Nordson representative.
S
Confirm the correct operation of all safety devices before placing the
equipment back into operation.
S
Dispose of waste cleaning compounds and residual process materials
according to governing regulations. Refer to the applicable MSDS or
contact the authority having jurisdiction for information.
S
Keep equipment safety warning labels clean. Replace worn or damaged
labels.
This equipment safety information is applicable to the following types of
Nordson equipment:
S
hot melt and cold adhesive application equipment and all related
accessories
S
pattern controllers, timers, detection and verification systems, and all
other optional process control devices
Issued 10-11
1-5
Safety