Nordson ProBlue Flex Product Manual page 394

Adhesive melter with bbconn controls

Hide thumbs Also See for ProBlue Flex:

Table of Contents

Hose/Applicator Expansion Base

Removing the Melter from the Sub-Base

Part 1128350_02

7. Push the melter backwards to disengage the locking tabs on the

sub-base, and lift the melter from the sub-base.

Figure on the left shows the melter being disengaged from the sub-base.

NOTE: Be careful not to damage the ground wire.

8. Lift the melter from the sub-base to remove.

E 2020 Nordson Corporation

Troubleshooting