Maintenance And Repair Practices; Equipment Safety Information - Nordson ProBlue Flex Product Manual

Maintenance and Repair Practices

Equipment Safety Information

E 2020 Nordson Corporation
Allow only personnel with appropriate training and experience to operate
S
or service the equipment.
Perform scheduled maintenance activities at the intervals described in
S
this document.
Relieve system hydraulic and pneumatic pressure before servicing the
S
equipment.
De-energize the equipment and all auxiliary devices before servicing the
S
equipment.
Use only new Nordson-authorized refurbished or replacement parts.
S
Read and comply with the manufacturer's instructions and the SDS
S
supplied with equipment cleaning compounds.
NOTE: SDSs for cleaning compounds that are sold by Nordson are
available at www.nordson.com or by calling your Nordson representative.
Confirm the correct operation of all safety devices before placing the
S
equipment back into operation.
Dispose of waste cleaning compounds and residual process materials
S
according to governing regulations. Refer to the applicable SDS or
contact the authority having jurisdiction for information.
Keep equipment safety warning labels clean. Replace worn or damaged
S
labels.
This equipment safety information is applicable to the following types of
Nordson equipment:
hot melt and cold adhesive application equipment and all related
S
accessories
pattern controllers, timers, detection and verification systems, and all
S
other optional process control devices
Issued 09-19
Safety 1-5