Nordson ProBlue Flex Product Manual page 53

4
5
Figure 3-8 Disconnecting ground wire (some components not shown)
1. Sub-base
2. Chassis
E 2020 Nordson Corporation
3. See Figure 3-8. Disconnect the ground wire from the chassis to sub-base
by doing the following:
a. Remove the chassis cover plate screw and then slide the cover plate.
b. Locate the ground wire and disconnect.
3
3. Chassis cover plate screw
4. Chassis cover plate
Installation
2
1
6
5. Sub-base ground wire
connection
6. Chassis ground wire
connection
Part 1128350_02
3-13