Parts; Using The Illustrated Parts Lists - Nordson ProBlue Flex Product Manual

Using the Illustrated Parts Lists

The number in the Item column corresponds to the circled item number in the parts
list illustration. A dash in this column indicates that the item is an assembly.
The number in the Part column is the Nordson part number you can use to order the
part. A series of dashes indicates that the part is not saleable. In this case, you must
order either the assembly in which the part is used or a service kit that includes the
part.
Item Part
— 0000000
1 000000
2 - - - - - -
3 0000000
NS 000000
NOTE A: Important information about item 1
AR: As Required
NS: Not Shown
E 2020 Nordson Corporation
To order parts, call the Nordson Customer Service Center or your local
Nordson representative. Use these five-column parts lists, and the
accompanying illustrations, to describe and locate parts correctly. The
following chart provides guidance for reading the parts lists.
The Description column describes the part and
sometimes includes dimensions or specifications.
The Note column contains letters that refer to notes at
the bottom of the parts list. These notes provide
important information about the part.
The Quantity column tells you how many of the part
is used to manufacture the assembly shown in the
parts list illustration. A dash or AR in this column
indicates that the amount of the item required in
the assembly is not quantifiable.
Description
Assembly A
S Part of assembly A
S S Part of item 1
S S S Part of item 2
S S S S Part of item 3

Parts

8-1
Section 8
Parts
Quantity Note
—
2 A
1
AR
2
Part 1128350_02