Fill System Specifications - Nordson ProBlue Flex Product Manual

Fill System Specifications

Item
Adhesive forms
Maximum size
Adhesive transfer maximum rate
Transfer hose length
Total air consumption
Conditioning
Operating air:
Dynamic
Static
Air line tubing size (between solenoid
valve and suction lance)
Inlet air connection
Dimensions (W x D x H):
Single-feed Adhesive Container
Clearance
Multi-feed Adhesive Container
Clearance
Adhesive storage bin capacity:
Single-feed bin
Multi-feed bin
IP rating (sequencer and adhesive
storage bin)
Adhesive Bin Factory Pressure Setting
Noise Emission
E 2020 Nordson Corporation
Pellets, pastilles, mini-slats
Pastilles: 12 mm (0.472 in.) diameter
S
Mini-slats: 12 mm X 12 mm (0.472 in. X 0.472 in.) in length
S
275 kg (600 lb)/hour (dependent on adhesive type)
4 m (13 ft), 9 m (29.5 ft), or 18 m (59 ft)
By transfer rate:
17 SCFM at 3.4 bar (50 psi) to transfer 105 kg/hr (232 lb/hr) with
S
a 4 m hose at a 4 m rise
22 SCFM at 4.1 bar (60 psi) to transfer 113 kg/hr (248 lb/hr) with
S
a 9 m hose at a 4 m rise
30 SCFM at 6.2 bar (90 psi) to transfer 91 kg/hr (200 lb/hr) with an
S
18 m hose at a 4 m rise
Average: 1.3 SCFM for a complete system [melter, 4 m transfer hose,
4.1 bar (60 psi)] operating at 11 kg/hr (25 lbs/hr) adhesive output
Dry, non-lubricated
Minimum Pressure 2.75 bar (0.275 MPa or 40 psi)
Maximum Pressure 5.5 bar (0.55 MPa or 80 psi)
Maximum Pressure 6.9 bar (0.69 MPa or 100 psi)
10 mm OD, 8 mm ID
¼ in. NPT female
¼ in. BSPP female
G ¼ female
480 x 554 x 917 mm (19 x 22 x 36 in)
688 x 667 x 1656 mm (26 x 27 x 65 in)
40 kg (88 lb) with optional grate
64 kg (141 lb) usable without grate
40 kg (88 lb) usable with grate
64 kg (141 lb) usable without grate
IP54
Single Feed: 65 psi (4.48 bar)
Multi-Feed: 75 psi (5.17 bar)
76 dBa
Technical Data
Data
Part 1128350_02
7-9