Nordson ProBlue Flex Product Manual page 393

4
Figure G-4 Disconnecting ground wire
1. Sub-base
2. Chassis
E 2020 Nordson Corporation
5. Open the E-Box enclosure door and remove the side enclosure panel to
the chassis cover plate and chassis-to-sub-base ground wire.
See figure on the left (E-Box enclosure door and side enclosure panel
highlighted in grey).
6. See Figure G-4. To disconnect the ground wire from the chassis to
sub-base, do the following:
a. Remove the chassis cover plate screw, and remove and retain the
cover plate.
b. Locate the ground wire from the sub-base and disconnect it from the
chassis.
3
5
6
3. Chassis cover plate screw
4. Cover plate (removed)
Hose/Applicator Expansion Base
2
5. Sub-base ground wire
connection
6. Chassis ground wire
connection
G-5
1
Part 1128350_02