Troubleshooting; About This Section; Safety - Nordson ProBlue Flex Product Manual

About This Section

Safety

E 2020 Nordson Corporation
WARNING! Allow only qualified personnel to perform the following tasks.
Follow the safety instructions in this document and all other related
documentation.
This troubleshooting section covers only the most common problems you
may encounter. If you cannot resolve the problem using the information
provided in this section, contact your Nordson representative for technical
assistance.
For troubleshooting details also refer to one of the following manuals:
-
ProBlue Flex Adhesive Melter Using the OLED User Interface Manual
(P/N 1128351).
-
ProBlue Flex Adhesive Melter OEM User Interface Manual
(P/N 1129255).
This section is organized as follows:
Melter troubleshooting information—includes melter-related
S
troubleshooting procedures.
Fill system troubleshooting information—includes fill system-related
S
troubleshooting tables and procedures.
Never disconnect cables from, or reconnect cables to, the power
S
distribution PCA board while the melter is energized.
Before breaking any hydraulic connection, always relieve system
S
pressure. Refer to Relieving System Pressure in Maintenance
(Section 5).
Refer to the safety information provided with optional equipment.
S
If the melter is removed from its sub-base for diagnostic checks or
S
service, ensure that the ground lead between the chassis and the
sub-base is re-attached when the melter is reconnected to the sub-base.

Troubleshooting

Section 6
Troubleshooting
6-1
Part 1128350_02