Basic Melter Operation; Operator Level Tasks; Additional Information - Nordson ProBlue Flex Product Manual

Operator Level Tasks

Additional Information

E 2020 Nordson Corporation

Basic Melter Operation

WARNING! Allow only personnel with appropriate training and experience to
operate or service the equipment. The use of untrained or inexperienced
personnel to operate or service the equipment can result in injury, including
death, to themselves and others, and damage to the equipment.
The following is a list for accomplishing operator-level tasks:
1. Filling the melter tank.
2. Starting the melter.
3. Operating the melter.
4. Shutting the melter down.
Before proceeding with the next set of tasks make sure the melter is fully
installed and connected as described in the accompanying Installation Guide
(P/N 1128353).
This section presents operating procedures in their most commonly used
form. Procedural variations or special considerations are explained in the
additional information that follows most procedures.
Basic Melter Operation
Section 4
Part 1128350_02
4-1