Table of Contents
Advertisement
Figure F-9
Wiring the transformer chassis
1. Terminal block
E 2020 Nordson Corporation
1
3
2. Ground lug
2. Connect the power cable to the terminal block (terminals 1, 2, and 3).
WARNING! Risk of electrical shock. Be sure that steps 3, 4, and 5 are
completed before installing and using the melter.
3. Connect the power cable ground lead to the ground lug that is located on
the transformer chassis.
4. Reconnect the ground lead from the transformer chassis to the ground
connection inside the transformer cover.
5. Reinstall the transformer cover and refasten the two screws.
ProBlue Flex 400/480 Volt Transformer
3. Cable clamp
F-13
2
Part 1128350_02
Advertisement
Table of Contents
Troubleshooting
