Unpack The Melter; Contents Of The Installation Kit - Nordson ProBlue Flex Product Manual

Unpack the Melter

Contents of the Installation Kit

P/N 1022993
P/N 1127292
P/N 1127671
Figure 3-4 Ship-with kit contents
E 2020 Nordson Corporation
Before starting the installation, remove the melter from the pallet, locate the
installation kit, and inspect the melter for damaged and missing parts. Report
any problems to your Nordson representative.
The installation kit (P/N 1127598) provided with the melter contains the
components shown in Figure 3-4. The quantity and type of hose fittings
provided in the kit depends upon the melter's model number and
configuration.
The installation kit also contains a package of safety label overlays that are
printed in different languages. If required by local regulations, the appropriate
language overlay should be applied over the English version of the same
label. Refer to Safety Labels and Tags in Safety (Section 1) for the location of
each safety label on the melter.
P/N 1034145
P/N 331872
NOTE: 400/480 volt transformers are shipped with a separate installation kit.
Refer to ProBlue Flex 400/480 Volt Transformer (Appendix F) for installation
instructions, parts information, and wiring details.
Installation 3-9
P/N 105800
P/N 173871
Part 1128350_02