Intended Use; Limitations Of Use; Electromagnetic Compatibility (Emc) - Nordson ProBlue Flex Product Manual

Intended Use

Limitations of Use

Electromagnetic Compatibility (EMC)

E 2020 Nordson Corporation
Observe the safety instructions prior to using the ProBlue Flex adhesive
melter. Nordson recommends obtaining detailed information on the materials
to be used. Nordson will not be liable for personal injury or property damage
resulting from unintended use.
The ProBlue Flex adhesive melter is designed to be used:
Only to melt and convey suitable materials, such as thermoplastic hot
S
melt adhesives
With compatible equipment manufactured by Nordson Corporation
S
In non-explosive environments
S
Use the ProBlue Flex adhesive melter only for the purpose for which it is
designed. The melter should not be used:
In a defective condition
S
With the electrical cabinet door open
S
With the tank lid open
S
In a potentially explosive atmosphere
S
When the melter is not in compliance with the related specifications
S
The melter may not be used to process the following:
Polyurethane hot melt adhesive (PUR) or thermoplastic with melt
S
index (extruder based materials)
Explosive and flammable materials
S
Erosive and corrosive materials
S
Food products
S
The ProBlue Flex adhesive melter is intended for use in industrial
applications.
When operated in residential or commercial areas, the melter may cause
interference in other electrical devices.
Description 2-5
Part 1128350_02