Operating Practices; Maintenance And Repair Practices - Nordson ProBlue Flex User Manual

6
ProBlue Flex OEM User's Guide
Part 1129255_01

Operating Practices

S
Familiarize yourself with the location and operation of all safety devices
and indicators.
S
Confirm that the equipment, including all safety devices (guards,
interlocks, etc.), is in good working order and that the required
environmental conditions exist.
S
Use the Personal Protective Equipment (PPE) specified for each task.
Refer to Equipment Safety Information or the material manufacturer's
instructions and SDS for PPE requirements.
S
Do not use equipment that is malfunctioning or shows signs of a potential
malfunction.

Maintenance and Repair Practices

S
Allow only personnel with appropriate training and experience to operate
or service the equipment.
S
Perform scheduled maintenance activities at the intervals described in
this document.
S
Relieve system hydraulic and pneumatic pressure before servicing the
equipment.
S
De‐energize the equipment and all auxiliary devices before servicing the
equipment.
S
Use only new Nordson‐authorized refurbished or replacement parts.
S
Read and comply with the manufacturer's instructions and the SDS
supplied with equipment cleaning compounds.
NOTE: SDSs for cleaning compounds that are sold by Nordson are
available at www.nordson.com or by calling your Nordson representative.
S
Confirm the correct operation of all safety devices before placing the
equipment back into operation.
S
Dispose of waste cleaning compounds and residual process materials
according to governing regulations. Refer to the applicable SDS or
contact the authority having jurisdiction for information.
S
Keep equipment safety warning labels clean. Replace worn or damaged
labels.
E 2020 Nordson Corporation