Basic Melter Operation
4-6
Commissioning Setup Wizard
Part 1128350_02
(contd)
Menu Screens
Temperature Unit
Select an option by pressing the or buttons:
Celsius or Fahrenheit
Press
Pressure Unit
Select an option by pressing the or buttons:
kPa, BAR, PSI
Press
Mass Unit
Select from the following options by pressing the
or buttons:
kg or lb
Press
Recipes
Select to enable or disable recipes by pressing the
or buttons.
Enabling Recipes allows you to save and recall job
specific settings.
Heat Schedule
Select to enable or disable the heat schedule by
pressing the or buttons.
Enabling Heat Schedule allows you to define daily
and weekly scheduled Heat On/Off and Setback
events.
Melter ID
Use the keypad to assign a unique melter ID.
Press
NOTES:
Complete making your Commissioning Wizard selections before
S
switching on the Master Heater control.
If you have the optional Fill system, the Master Fill control switches on
S
automatically, and will start filling once the tank has reached its set point
temperature.
By default, all external zones are disabled. You must individually enable
S
each zone, one at a time.
You can rerun the Commissioning Wizard at any time by navigating to:
S
Home screen > System Settings > Preferences > Restart Wizard
Function
to select and continue.
to select and continue.
to select and continue.
to confirm.
E 2020 Nordson Corporation