Oled User Interface; Commissioning Setup Wizard - Nordson ProBlue Flex Product Manual

OLED User Interface

Commissioning Setup Wizard

E 2020 Nordson Corporation
The melter's OLED user interface allows you to navigate to the different
menus for setting up, operating, and fine-tuning the system settings.
The Commissioning Wizard starts upon first time power-up or after a factory
reset.
You must complete the Commissioning Wizard's setup menu sequence. The
Commissioning Setup Wizard menus are as follows:
Menu Screens
Language Select from any of the nine language options by
pressing the  or  buttons.
Press
NOTE: There is a lag of about 30 seconds when a
different language is selected.
Start Wizard
Press
Or
Load Settings from
Load Settings from USB option allows you to quickly
USB
load melter system settings from an existing backup
file.
If you do not have a backup file, the select Start
Wizard to continue.
Date Format Press the  or  to select from the following date
formats:
DD/MM/YYYY, MM/DD/YYYY, YYYY/DD/MM
Press
Date Use the numeric keypad to set the current date.
Time Format Select from the following time formats by pressing
the  or  buttons:
12-hour clock or 24-hour clock
Press
Set Clock Use the numeric keypad to set the current time.
Press
Basic Melter Operation
Function
to select and continue.

to select and start the wizard.

to select and continue.

to select and continue.

to select and continue.

4-5
Continued...
Part 1128350_02