Installation; Unpacking; Transport; Storage - Nordson EP 30 Manual

Installation

Unpacking

Transport

Storage

Disposal

Installation
E 2005 Nordson Corporation
WARNING: Allow only qualified personnel to perform the following tasks.
Observe and follow the safety instructions in this document and all other
related documentation.
Unpack carefully. Then check for any damage caused during shipping.
Reuse packaging materials or dispose of properly according to local
regulations.
The application head is a high precision, valuable part. Handle very
carefully! Protect the nozzle from damage.
Do not store outside! Protect from humidity and dust. Do not lay application
head on the nozzle. Protect the nozzle from damage.
When your Nordson product has exhausted its purpose and/or is no longer
needed, dispose of it properly according to local regulations.
When installing the application head, the following points should be
observed in order to avoid unnecessary effort later.
S
Protect from humidity, vibrations, dust and drafts.
S
Ensure access to parts relevant for maintenance and operation.
S
Install/attach the application head to/in the parent machine with the
mounting bracket. To achieve optimum adhesive application, during
assembly ensure that the distance and, when appropriate, the angle
between the nozzle and the substrate can be varied.
S
When installing the application head, ensure that cables, air hoses, and
heated hoses can not be bent, pinched, torn off or otherwise damaged.
EP 30
Hot melt application head EP 30
5
P/N 397191B