Instructions And Safety Messages; Installation Practices - Nordson ProBlue Flex User Manual

E 2020 Nordson Corporation

Instructions and Safety Messages

S
Read and follow the instructions provided in this document and other
referenced documents.
S
Familiarize yourself with the location and meaning of the safety warning
labels and tags affixed to the equipment. Refer to Safety Labels and Tags
at the end of this section.
S
If you are unsure of how to use the equipment, contact your Nordson
representative for assistance.

Installation Practices

S
Install the equipment in accordance with the instructions provided in this
document and in the documentation provided with auxiliary devices.
S
Ensure that the equipment is rated for the environment in which it will be
used. This equipment has not been certified for compliance with the
ATEX directive nor as nonincendive and should not be installed in
potentially explosive environments.
S
Ensure that the processing characteristics of the material will not create a
hazardous environment. Refer to the Safety Data Sheet (SDS) for the
material.
S
If the required installation configuration does not match the installation
instructions, contact your Nordson representative for assistance.
S
Position the equipment for safe operation. Observe the requirements for
clearance between the equipment and other objects.
S
Install lockable power disconnects to isolate the equipment and all
independently powered auxiliary devices from their power sources.
S
Properly ground all equipment. Contact your local building code
enforcement agency for specific requirements.
S
Ensure that fuses of the correct type and rating are installed in fused
equipment.
S
Contact the authority having jurisdiction to determine the requirement for
installation permits or inspections.
ProBlue Flex OEM User's Guide
5
Part 1129255_01