Safety Instructions
Description
Intended Use
Unintended Use − Examples −
E 2005 Nordson Corporation
WARNING: Allow only qualified personnel to perform the following tasks.
Observe and follow the safety instructions in this document and all other
related documentation.
Hot melt application heads in the series EP 30 − hereafter also referred to
as application head − may be used only for bead application of hot melt
adhesives.
Any other use is considered to be unintended. Nordson will not be liable for
personal injury or property damage resulting from unintended use.
Intended use includes the observance of Nordson safety instructions.
Nordson recommends obtaining detailed information on the materials to be
used.
The application head may not be used under the following conditions:
S
When changes or modifications have been made by the customer
S
In defective condition
S
In a potentially explosive atmosphere
S
When values stated under Technical Data are not complied with.
The application head may not be used to apply the following materials:
S
Explosive and flammable materials
S
Erosive and corrosive materials
S
Food products.
EP 30
Hot melt application head EP 30
1
P/N 397191B