U3025AE10
Front and Rear Panel Features
Figure 3
Front Panel (Multiport Test Set)
Access Ports
Active
LED
Active LED
• When the test set power switch is On and is connected and addressed by a PNA, the
LED is On (illuminated).
• The LED is Off (not illuminated) when the test set power switch is in Standby, or not
addressed by a PNA.
Test Port LEDs
• An illuminated LED indicates an active port and if it is in Source or Receiver mode.
• If all of the Source or Receiver LEDs are illuminated, all of the ports are terminated.
• If all of the odd numbered ports are Off, Port 1 of the PNA is active.
• If all of the even numbered ports are Off, Port 2 of the PNA is active.
Test Ports
2.4 mm Bulkhead (male)
–
• Port 3
12
–
12
Test Ports
General Specifications
Access Ports
Test Port LEDs
User's Guide