Brake Pad Inspection - Victory Cross Roads Classic Service Manual

MAINTENANCE
Front Brake Pad Inspection
Wear indicator grooves are provided on each front brake
pad to allow for a visual inspection without pad removal.
Inspect pads by viewing from rear of caliper.
Replace pads if worn to bottom of grooves or near the
minimum thickness.
Refer to Chapter 15 to remove pads for further inspection
or to replace if worn.
Minimum Thickness:
Front Pad: 1.5mm (.060 in.)
2.16 2.16
9924047 - 2012-2013 VICTORY Cross Roads / Cross Country Service Manual
Grooves
© Copyright 2012 Polaris Sales Inc.
Rear Brake Pad Inspection
Wear indicator grooves are provided on each rear brake
pad to allow for a visual inspection without pad removal.
Inspect pads from top of caliper behind swingarm.
Replace pads if worn to bottom of grooves or near the
minimum thickness.
Refer to Chapter 15 to remove pads for further inspection
or to replace if worn.
Minimum Thickness:
Rear Pad: 1.5mm (.060 in.)
Grooves