Turn Signal Momentary Feature; Starter Interlock; Right Handlebar Controls; Engine Stop Switch - Victory Cross Roads Classic Service Manual

2012-2013
Table of Contents

Advertisement

SPECIFICATIONS / GAUGE / AUDIO

Turn Signal Momentary Feature

When passing a vehicle or when changing lanes, you have
the option of using the momentary feature built in to the
turn signal auto-cancel system.
Push the turn signal switch in the direction you wish to turn
and hold it in that position for at least 1 second. The
momentary feature will activate and the signal will cancel
when you release the switch.
Hold Left or
Right for one
flash cycle

Starter Interlock

The motorcycle is equipped with a starter interlock switch
(A) that prevents the electric starter from operating when
the transmission is in gear and the clutch is engaged (lever
released), or if the Reverse lever is in the Reverse (Up)
position (if equipped).
A
CAUTION
Never start the motorcycle in gear with the clutch
disengaged unless you are properly seated with the
front brake applied.
1.28
9924047 - 2012-2013 VICTORY Cross Roads / Cross Country Service Manual

RIGHT HANDLEBAR CONTROLS

Engine Stop Switch

The engine stop/run switch completes or interrupts the
ignition, starter, and fuel pump circuits.
Press RUN side of engine stop/run switch (RUN position).
Press STOP side of switch to interrupt circuits and stop the
engine. The engine should not start or run when the switch
is in the STOP position. Use STOP/RUN switch to turn
engine off under either normal or emergency conditions.
Turn key OFF after the engine stops.
NOTE: The stop switch must be in the RUN position
for turn signal operation.
RIGHT
Handlebar Switch

Engine Starter Button

The starter button works only when STOP/RUN switch is
in RUN position and transmission is in neutral (or clutch is
disengaged).
RIGHT Handlebar
Switch

Front Brake Lever Reach Adjustment

Front brake lever "reach" or distance to the hand grip is
adjustable. To adjust the front brake lever reach:
• Pull the lever away from the grip (1) and hold.
• Turn dial (2) to align a lower number with arrow (3)
on lever to increase lever reach distance.
© Copyright 2012 Polaris Sales Inc.
Run
Start

Advertisement

Table of Contents
loading

Table of Contents