Victory Cross Roads Classic Service Manual page 279

CLUTCH, PRIMARY, & SHIFT LINKAGE
11. Remove (9) identical steel plates that separate the (8)
identical friction plates.
12. Remove judder friction plate, judder spring, and
judder spring seat.
13. Note difference between judder plate (F) and next
friction plate (G). The judder plate is the innermost
friction plate on the clutch hub.
Clutch Inspection
1. Clean clutch plates, inner hub, and outer basket.
Clutch Basket
2. Inspect clutch gear teeth (A) for wear, cracks or
damage.
3. Inspect inside surfaces (B) of basket for cracks or
wear (grooves) from clutch plates.
A
B
4. Replace parts that fail inspection
9.16
9924047 - 2012-2013 VICTORY Cross Roads / Cross Country Service Manual
5. Rotate hub bearing. Check for smooth rotation. Inner
6. Lubricate bearing with engine oil.
Clutch Hub
7. Inspect spline teeth (D) for wear, cracks or damage.
F
G
8. Inspect surface of steel plate guides (E) on outer edge
9. Visually inspect friction and steel plates for wear or
C
© Copyright 2012 Polaris Sales Inc.
race should have no detectable radial movement (C).
F
of hub for wear, grooves, or damage. Check all posts
(F) for cracks or damage. Check the snap ring groove
for wear.
damage on both surfaces. Replace plates as a set if
any plate is worn or damaged.
D
E