Instrument Bezel (Cross Country) - Victory Cross Roads Classic Service Manual

4. Reconnect ACC socket and iPod adaptor multiplug
and reposition harness beneath fuel tank.
5. Move fairing outers into position and press retainers
into rubber grommets.
6. Insert screws (4 per side) to secure inner fairing panel
to outer fairing panel and torque screws to 32 in-lbs
(3.6 Nm).

Instrument Bezel (Cross Country)

Bezel removal is not required for removal of dash panel
or other fairing parts. To remove the bezel, first remove
the dash panel.
Removal
1. Remove dash panel (page 3.15).
9924047 - 2012-2013 VICTORY Cross Roads / Cross Country Service Manual
2. With dash panel removed, carefully pry inner tabs (A)
and push bezel toward front side of dash until tabs are
released.
3. Carefully pry outer tabs (B) and push bezel toward
front side of dash to remove.
Installation
1. Reverse removal procedure to install bezel. Align
bezel with opening in dash panel.
2. Place outer tabs into opening and hook tabs on inside
edge of dash.
3. Press inner edge of bezel toward dash until it snaps
into place and all tabs are engaged with the inside
edge of dash panel.
4. Install dash panel.
© Copyright 2012 Polaris Sales Inc.
FRAME-BODY-EXHAUST
A
B
3
3.23