Oil Pump Assembly - Victory Cross Roads Classic Service Manual

LUBRICATION & COOLING

Oil Pump Assembly

Refer to Illustration on page 4.11 for assembly
view and torque values.
1. Press short dowel pins into lubrication side of pump
body using an arbor press and a 6mm allen head
screw (A).
2. Press long dowel pins into cooling side of pump body
using same method as above.
3. Secure pump body in a soft jaw vise. Apply Victory
engine oil to threads of lubrication pressure relief valve
and install into pump body. The lubrication relief valve
has a shorter hexagonal portion than the cooling relief
valve. Torque to specification.
Pressure Relief Valve: 20 ft-lbs (27.1 Nm)
4.12
9924047 - 2012-2013 VICTORY Cross Roads / Cross Country Service Manual
A
= T
© Copyright 2012 Polaris Sales Inc.
4. Assemble lubrication gerotor on pump shaft.
5. Lubricate shaft with moly assembly paste PN 2871460.
6. Insert pump shaft/rotor assembly into pump body in
direction shown (B).
7. Lubricate and install the cooling gerotor with pin slot
(C) facing OUT.
8. Insert pin (D) into shaft on cooling side.
9. Push shaft inward while rotating to align pin and slot.
C
B
D