Victory Cross Roads Classic Service Manual page 280

10. Replace steel plates if grooved, distorted or
discolored. Inspect plates for distortion by placing
each plate on a precision flat surface. Insert a feeler
gauge (G) between plate and flat surface in several
places.
Clutch Steel Plate Warp Service Limit: .20mm
(.008in)
11. Measure thickness of friction plates in several places.
Thickness should be the same at each place. Replace
plates that fail inspection.
Friction Plate Thickness Minimum): 2.00 mm (.078 in)
Clutch Pressure Plate
12. Inspect pressure plate for cracks, scoring, or wear on
friction surface.
13. Inspect lifter retaining ring groove (H) for cracks or
9924047 - 2012-2013 VICTORY Cross Roads / Cross Country Service Manual
CLUTCH, PRIMARY, & SHIFT LINKAGE
chips. Replace pressure plate if it fails inspection.
G
© Copyright 2012 Polaris Sales Inc.
H
9
9.17