Floorboard / Foot Control Mounting - Victory Cross Roads Classic Service Manual

Floorboard / Foot Control Mounting

SHIFT
18 ft-lbs
(24.5 Nm)
BRAKE
Apply soap & water solution to install
12 ft-lbs
(16.0 Nm)
35 ft-lbs (47.5 Nm)
9924047 - 2012-2013 VICTORY Cross Roads / Cross Country Service Manual
85 in-lbs (9.6 Nm)
A
96 in-lbs (10.8 Nm)
© Copyright 2012 Polaris Sales Inc.
FRAME-BODY-EXHAUST
Pedal position adjustment:
1. Remove screw (A) below.
2. Move pedal assembly forward or rearward until the hole
for the screw is aligned with one of the other two
threaded holes.
3. Install the screw and torque according to specification.
4. Adjust the shift pedal height as follows:
5. Hold linkage rod end (B) with a 7/16 in. wrench and
loosen jam nuts (CO with a 1/2 in. wrench.
6. Rotate linkage rod to set pedal height.
7. Hold linkage rods. Securely tighten the jam nuts.
18 ft-lbs
(24.5 Nm)
3
3.31