Victory Cross Roads Classic Service Manual page 212

32. Install Engine Mounting Plates PV-48737 in place of
original upper rear engine mount plates using four of
the 5 bolts removed in previous step (see page 6.3).
33. Torque all bolts to 82 ft-lbs (111 Nm).
PV-48737
34. After PV-48737 plate fasteners are tightened, remove
front upper engine mount bolts and plates.
9924047 - 2012-2013 VICTORY Cross Roads / Cross Country Service Manual
ENGINE REMOVAL & INSTALLATION
35. Remove the swingarm pivot shaft nut and washer
from the RIGHT side.
NOTE: The (4) lower engine mount bolts will contact
the swingarm
swingarm is removed.
36. Support the rear frame with a shop crane or an
overhead hoist. Be sure the front wheel is secured in
the wheel vise, and the engine is properly supported
and secured on the platform lift.
37. Remove lower shock bolt and lower strut bolt (G).
© Copyright 2012 Polaris Sales Inc.
and cannot be removed
G
until
6
6.9