Fairing Mount Removal - Victory Cross Roads Classic Service Manual

Fairing Mount Removal

1. Remove fairing (page 3.14) and.
2. Cut tie straps (A). Radio(s), radio fuse, and instrument
cluster harnesses (B) can remain connected.
3. Remove P-Clamp fasteners (C) for left and right wire
harnesses. Separate any associated connectors (D)
for main harnesses and any that are routed through
B
A
C
E
4 mount bolts:
19 ft-lbs (26 Nm)
9924047 - 2012-2013 VICTORY Cross Roads / Cross Country Service Manual
the two openings in the fairing mount bracket
(handlebar switch wires and radio antenna cable).
Disconnect the radio LCD display harness (routed
below the radio).
4. Remove (4) mount bolts (E) and lift fairing mount
assembly upward off handlebar clamp, then forward
to remove. Check for any remaining wires attached.
© Copyright 2012 Polaris Sales Inc.
FRAME-BODY-EXHAUST
A
Handlebar switch
wires, etc.
3
C
D
3.17