Victory Cross Roads Classic Service Manual page 465

BRAKES
3. Disconnect front brake light switch wires at switch (B).
4. Remove switch (C) and brake lever nut (D), brake lever
pivot screw, lever and bushing.
5. Remove brake line from master cylinder (E).
6. Remove screws (F), clamp, and master cylinder.
B
E
7. Remove reservoir cover and diaphragm.
8. Pull dust boot off piston and out of cylinder bore.
9. Remove snap ring.
15.26
9924047 - 2012-2013 VICTORY Cross Roads / Cross Country Service Manual
C
D
F
© Copyright 2012 Polaris Sales Inc.
10. Slide piston out with spring. Note spring orientation for
assembly of new spring (new parts).
11. Clean master cylinder with isopropyl alcohol and dry
with compressed air. DO NOT soak in alcohol for more
than 30 seconds. DO NOT aim pressurized air directly
at the level sight glass.
12. Inspect bore (G) and chamfer of bore (H) for corrosion,
scratches, scoring, or pitting. Replace master cylinder
if any of these conditions are evident.
H
G