Fuel Level Sensor Removal; Fuel Level Sensor Installation - Victory Cross Roads Classic Service Manual

Table of Contents

FUEL SYSTEM / FUEL INJECTION

Fuel Level Sensor Removal

1. Remove fuel pump (page 5.18).

2. The sensor assembly is mounted on a bracket on the

left side of the fuel tank and retained by a tab on the

center bar of the fuel sensor body. Below is a cutaway

view showing the sensor mounted to the bracket with

the tank upright in a normal position.

CUTAWAY VIEW OF SENSOR

3. With tank inverted as shown, use a machinist's scribe

with a small hook or a small screwdriver to carefully pry

the center of the bar outward until lock tab is released.

4. Push sensor off mounting bracket and remove it from

9924047 - 2012-2013 VICTORY Cross Roads / Cross Country Service Manual

1. Orient sensor as shown and place in tank opening.

2. Slide sensor onto bracket and push until tab engages

bracket. Pull downward lightly on sensor to be sure

sensor tab is locked into bracket.

3. Install fuel pump (page 5.21).

Table of Contents