Victory Cross Roads Classic Service Manual page 32

Upper Left Hand Control*
Operation of the left handlebar CB control is outlined in
greater detail on the following pages.
1. PTT (Push to Talk): Press and hold top or bottom of
PTT button to transmit (page 1.39).
2. Squelch: Press SQ (+) or SQ (-) to adjust CB radio
channel reception sensitivity (page 1.39).
3. COM: Press COM to turn the CB on or off. Press and
hold COM to select a COM channel.
4. ICOM: Press ICOM to turn the driver/passenger
intercom on or off. Press and hold ICOM to access
Voice Activated Switch (VOX) settings (page 1.41).
1
Passenger CB Controls
1. PTT (Push to Talk): Press and hold PTT button to
transmit.
2. Rear Volume: Press (+) or (-) to adjust the rear
headset volume.
9924047 - 2012-2013 VICTORY Cross Roads / Cross Country Service Manual
2 3
© Copyright 2012 Polaris Sales Inc.
SPECIFICATIONS / GAUGE / AUDIO
Audio System Power
The ignition key must be in the PARK or ON position to use
the audio system.
With the key in the PARK or ON position and audio system
OFF, the screen will display "VICTORY".
VICTORY
NOTE: To prevent battery drain, do not leave the key
in the PARK or ON position for long periods.
Press the VOL (+) button to turn the audio system on.
The screen will display the active entertainment source.
4
1. Current audio source:
• (U.S.) FM / AM / WX / iPod - AUX / XM
• (Euro) FM / MW / LW / iPod - AUX
2. Station preset number (P1 - P15).
3. CB radio active and active channel (if equipped).
4. Intercom system active (if equipped).
5. Stereo indicator.
NOTE: The audio system will always display the last
active source when turned on.
1 5
2
3
1.31
1