YOKOGAWA Admag TI Series User Manual page 146

*1: From the table below, select the execution of the backup function. In the communication access of F
Fieldbus, the communication access is set with the procedures of the interactive operation guide called DD Method.
Selection
F
OUNDATION
Display
Fieldbus
Not execute Not Execute
Store main to 1 Store Main to 1
Store main to 2 Store Main to 2
Store main to 3 Store Main to 3
Store main to SD Store Main to SD
Store EEP1 to SD Store EEP1 to SD
Store EEP2 to SD Store EEP2 to SD
Store EEP3 to SD Store EEP3 to SD
*2: The result of the backup function is displayed as shown below.
Selection
F
OUNDATION
Display
Fieldbus
Unexecuted Unexecuted
Success Success
Failure Failure
Running Running
Does not back up data.
Backs up parameter settings from the main board to memory 1 in the
display's built-in memory.
Backs up parameter settings from the main board to memory 2 in the
display's built-in memory.
Backs up parameter settings from the main board to memory 3 in the
display's built-in memory.
Backs up parameter settings from the main board to the microSD card.
Backs up parameter settings from memory 1 in the display's built-in
memory to the microSD card.
Backs up parameter settings from memory 2 in the display's built-in
memory to the microSD card.
Backs up parameter settings from memory 3 in the display's built-in
memory to the microSD card.
Backup not executed.
Backup successful.
Backup failed.
Parameter backup running.
<5. Functions>
OUNDATION
Description
Description
145
IM 01E21A02-03EN