Danfoss VLT AutomationDrive FC 360 Programming Manual page 94

Parameter Descriptions
12-96 Port Config
Option:
[0] Normal
*
[1] Mirror Port 1 to 2
[2] Mirror Port 2 to 1
[10] Port 1 disabled
[11] Port 2 disabled
[254] Mirror Int. Port to 1
4 4
[255] Mirror Int. Port to 2
12-98 Interface Counters
Range:
4000 [0 -
*
4294967295 ]
12-99 Media Counters
Range:
0 [0 - 4294967295 ] Read-only.
*
92
®
VLT AutomationDrive FC 360
Function:
Function:
Read-only.
Advanced interface counters from a
built-in switch can be used for low-
level trouble shooting. The parameter
shows a sum of port 1 + port 2.
Function:
Advanced interface counters from a built-
in switch can be used for low-level
troubleshooting. The parameter shows a
sum of port 1 + port 2.
Danfoss A/S © 06/2017 All rights reserved. MG06C702