Danfoss VLT AutomationDrive FC 360 Programming Manual page 72

Parameter Descriptions
5-93 Pulse Out 27 Bus Control
Range:
0 % [0 -
*
100 %]
4 4
5-94 Pulse Out 27 Timeout Preset
Range:
0 % [0 -
*
100 %]
5-95 Pulse Out 29 Bus Control
Range:
0 % [0 -
*
100 %]
5-96 Pulse Out 29 Timeout Preset
Range:
0 % [0 -
*
100 %]
70
VLT
Function:
Set the output frequency transferred to the
output terminal 27 when the terminal is
configured as [45] Bus Controlled in
parameter 5-60 Terminal 27 Pulse Output
Variable.
Function:
Set the output frequency transferred to the
output terminal 27 when the terminal is
configured as [48] Bus Ctrl Timeout in
parameter 5-60 Terminal 27 Pulse Output Variable
and a timeout is detected.
Function:
Set the output frequency transferred to the
output terminal 29 when the terminal is
configured as [45] Bus Controlled in
parameter 5-63 Terminal 29 Pulse Output
Variable.
Function:
Set the output frequency transferred to the
output terminal 29 when the terminal is
configured as [48] Bus Ctrl Timeout in
parameter 5-63 Terminal 29 Pulse Output
Variable, and a timeout is detected.
Danfoss A/S © 06/2017 All rights reserved.
®
AutomationDrive FC 360
MG06C702