Danfoss VLT AutomationDrive FC 360 Programming Manual page 109

Parameter Descriptions
15-45 Actual Typecode String
Range: Function:
0 [0 - 40 ] View the actual type code.
*
15-46 Drive Ordering No
Range: Function:
0 [0 - 0 ] View the 8-digit ordering number used for
*
reordering the frequency converter in its original
configuration.
15-47 Power Card Ordering No
Range: Function:
0 [0 - 8 ] View the power card ordering number.
*
15-48 LCP Id No
Range: Function:
0 [0 - 20 ] View the LCP ID number.
*
15-49 SW ID Control Card
Range: Function:
0 [0 - 20 ] View the control card software version number.
*
15-50 SW ID Power Card
Range: Function:
0 [0 - 20 ] View the power card software version number.
*
15-51 Frequency Converter Serial Number
Range: Function:
0 [0 - 10 ] View the frequency converter serial number.
*
15-53 Power Card Serial Number
Range: Function:
0 [0 - 19 ] View the power card serial number.
*
4.14.4 15-6* Option Indent.
This read-only parameter group contains information about
the hardware and software configuration of the options
installed in slots A, B, C0, and C1.
15-60 Option Mounted
Range: Function:
Size related [0 - 30 ] View the installed option type.
*
15-61 Option SW Version
Range: Function:
Size related [0 - 20 ] View the installed option software
*
version.
15-62 Option Ordering No
Range: Function:
Size related [0 - 8 ] Shows the ordering number for the
*
installed options.
MG06C702
Programming Guide
15-63 Option Serial No
Range:
Size related
15-70 Option in Slot A
Range:
0 [0 - 30 ] View the type code string for the option A, and a
*
15-71 Slot A Option SW Version
Range:
0 [0 - 20 ]
*
4.14.5 15-9* Parameter Info
Use this parameter group to view information about
available parameters for the frequency converter.
15-92 Defined Parameters
Range:
0 [0 - 2000 ] View a list of all defined parameters in the
*
15-97 Application Type
Range:
0 [0 - 0xFFFFFFFF ] This parameter contains data used by
*
15-98 Drive Identification
Range:
0 [0 - 56 ] This parameter contains data used by MCT-10 Set-
*
15-99 Parameter Metadata
Range:
0 [0 - 9999 ] This parameter contains data used by MCT-10
*
Danfoss A/S © 06/2017 All rights reserved.
Function:
[0 - 18 ] View the installed option serial number.
*
Function:
translation of the type code string.
Function:
View the software version for the option A.
Function:
frequency converter. The list ends with 0.
Function:
MCT-10 Set-up Software.
Function:
up Software.
Function:
Set-up Software.
4 4
107