Danfoss VLT AutomationDrive FC 360 Programming Manual page 70

Parameter Descriptions
4.6.5 5-6* Pulse Outputs
NOTICE
These parameters cannot be adjusted while the motor is
running.
Use these parameters to configure pulse outputs with their
functions and scaling. Terminal 27 and 29 are allocated to
4 4
pulse output via parameter 5-01 Terminal 27 Mode and
parameter 5-02 Terminal 29 Mode.
Output value
High output
value
P 5-60(term27)
P 5-63(term29)
Illustration 4.18 Configuration of Pulse Outputs
5-60 Terminal 27 Pulse Output Variable
Option:
[0] No operation
*
[45] Bus ctrl.
[48] Bus ctrl., timeout
[100] Output frequency
[101] Reference
[102] Process Feedback
[103] Motor Current
[104] Torque rel to limit
[105] Torq relate to rated
[106] Power
[107] Speed
[109] Max Out Freq
[113] PID Clamped Output
5-62 Pulse Output Max Freq 27
Range:
5000 Hz [4 - 32000
*
Hz]
68
®
VLT AutomationDrive FC 360
High freq. Output
P 5-62(term27) (Hz)
P 5-65(term29)
Function:
Function:
Set the maximum frequency for terminal
27, corresponding to the output variable
selected in parameter 5-60 Terminal 27
Pulse Output Variable.
Danfoss A/S © 06/2017 All rights reserved.
5-63 Terminal 29 Pulse Output Variable
Option:
[0] No operation
*
[45] Bus ctrl.
[48] Bus ctrl., timeout
[100] Output frequency
[101] Reference
[102] Process Feedback
[103] Motor Current
[104] Torque rel to limit
[105] Torq relate to rated
[106] Power
[107] Speed
[109] Max Out Freq
[113] PID Clamped Output
5-65 Pulse Output Max Freq 29
Range: Function:
5000 Hz [4 - 32000 Set the maximum frequency for terminal
*
Hz] 29 corresponding to the output variable
set in parameter 5-63 Terminal 29 Pulse
Output Variable.
4.6.6 5-7* 24 V Encoder Input
Connect the 24 V encoder to terminal 12 (24 V DC supply),
terminal 32 (channel A), terminal 33 (channel B), and
terminal 20 (GND). The digital inputs 32/33 are active for
encoder inputs when [1] 24 V encoder is selected in
parameter 7-00 Speed PID Feedback Source. The encoder is a
dual channel (A and B) 24 V type. Maximum input
frequency: 32 kHz.
Encoder connection to the frequency converter
24 V incremental encoder. Maximum cable length 5 m
(16.4 ft).
Function:
MG06C702