Rep 5.6 Dadf Paper Length Sensor - Xerox Phaser 3635MFP Service Manual

7. Remove the registration solenoid, pickup solenoid or scan motor as required,
DADF scan motor
Figure 2 Solenoid and motor removal
Replacement
1. Replacement is the reverse of the removal procedure.
Phaser 3635MFP/WorkCentre 3550
Figure
DADF pickup
solenoid
DADF registration
solenoid

REP 5.6 DADF Paper Length Sensor

2.
Parts List on PL 5.20
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Before performing this procedure, refer to
1. Remove the DADF, PL 5.10 Item
2. Remove the DADF rear cover,
3. Remove the DADF front cover,
4. Remove 3 screws to remove the input tray,
5. Disconnect CN10 from the
6. Remove the sensor assembly cover,
7. Remove the DADF paper length sensor,
Replacement
1. Replacement is the reverse of the removal procedure.
April 2010
4-17
WARNING
CAUTION
GP 10 General Disassembly Precautions.
1.
PL 5.10 Item 9.
PL 5.10 Item 10.
PL 5.20 Item 1.
DADF PWB.
PL 5.20 Item 12.
PL 5.20 Item 11.
Repairs and Adjustments
REP 5.5, REP 5.6