Mfp Controlcentre (Windows Only With Usb Connection); Using The Mfp Controlcentre - Xerox Phaser 6115MFP User Manual

MFP ControlCentre (Windows Only with USB
Connection)
The MFP ControlCentre (MCC) provides an easy to use Graphical User Interface (GUI) that
simplifies configuring your product and managing your fax directory lists from your computer
over USB.
The MCC stores configuration and setting in a .dat file that is uploaded from your computer to
your Phaser 6115MFP. It is possible to also save the .dat file to a directory on your computer.

Using the MFP ControlCentre

1. From your computer, select Start > All Programs > Xerox Office Printing >
Phaser 6115MFP > MCC.
2. From the MCC dialog box, click the Connect to Machine button.
3. Click the Download button. This downloads the current .dat file from the product.
4. Click the Menu button.
5. You can now configure your product settings.
and/or
6.
Click the Plus (+) icon in the left pane of the dialog box and configure your fax speed dial,
one-touch, group numbers, and email addresses.
7.
When finished, click the Upload button to save these settings to the product.
8.
When prompted, you can save the new .dat file you created to your computer.
See also:
Configuring the Product
Copying on page 7-1
Scanning on page 8-1
Faxing on page 9-1

MFP ControlCentre (Windows Only with USB Connection)

on page 3-5
Phaser® 6115MFP Multifunction Product
3-4