Personal Computer - Siemens SINUMERIK 808D ADVANCED Commissioning Manual
Hide thumbs
Also See for SINUMERIK 808D ADVANCED:
- Diagnostic manual (566 pages) ,
- Parameter manual (524 pages) ,
- Operating instructions manual (498 pages)
Table of Contents
Advertisement
2.3
Personal computer
A personal computer with the following basic configuration is necessary for commissioning:
● Operating system: Windows Vista (both 32-bit and 64-bit versions)/Windows 7 (both 32-bit and 64-bit versions)
● Hard drive capacity: > 40 GB
● Memory capacity: > 1 GB
● Ethernet interface: for NC, PLC, and drive commissioning
● RJ45 Ethernet cable
54
10.
Click the
button in the toolbar or select from the main window menu as follows to call
the connection dialog box:
11.
Select the network connections option and click this button to create new connection.
12.
Assign the parameters for a new network connection in the dialog box. Note that the access
level and password must be specified according to those set on the HMI.
Note: To avoid unauthorized access of the controller, change the Siemens default pass-
words to your own ones. For more information about changing a password, see Section
"Setting the password (Page 144)".
13.
After you finish the editing, click this button to save the settings.
14.
Click the following button or simply double-click the connection option to establish the con-
nection.
Commissioning Manual
01/2017
Advertisement
Table of Contents
