At$Evtqry Query The State Or Value Of The Specified Input Event - Novatel MT 3050 At Command Reference

AT$EVTQRY Query The State Or Value Of The
Specified Input Event
AT$EVTQRY
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<max input event>
<input event>
Notes
Example:
Query the State or Value of the Specified Input Event
This command allows the user to query the state or value of the input event
number
AT$EVTQRY=?
$EVTQRY: (0 - <max input event>)
OK
N/A
N/A
N/A
N/A
AT$EVTQRY=<input event>
$EVTQRY: <input event> = <state> (bInit=<updateFlag>)
N/A
Maximum input event # supported by the current firmware build(see $EVENT for
the current maximum input event value).
Range: 0 to <max input event>
Selects which input event to query
AT$EVTQRY=29
/* query input event 29 (Invalid GPS)
$EVTQRY: 29=1436
/* 1436 seconds of consecutive invalid GPS data
OK
- 245 -