Table of Contents
Advertisement
AT+CPMS Preferred Message Storage
AT+CPMS
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<mem1>
<mem2>
<mem3>
Notes
Preferred Message Storage
Set command selects memory storages <mem1>, <mem2> and <mem3> to be
used for reading, writing, etc.
AT+CPMS=?
+CPMS: ("ME","SM"),("ME","SM"),("ME","SM")
OK
AT+CPMS=<mem1>,<mem2>,<mem3>
+CPMS: 0,25,0,25,0,25
OK
AT+CPMS?
+CPMS: "SM",0,25,"SM",0,25,"SM",0,25
OK
N/A
N/A
N/A
String type; memory from which messages are read and deleted (commands List
Messages +CMGL, Read Message +CMGR and Delete Message +CMGD); defined
values:
"ME" = ME message storage
"SM" = SIM message storage
String type; memory to which writing and sending operations are made
(commands Send Message from Storage +CMSS and Write Message to Memory
+CMGW) ); refer to <mem1> for defined values
String type; memory to which received messages are preferred to be stored
(unless class of message defines a specific storage location; refer to command New
Message Indications +CNMI); refer to<mem1> for defined values
ME can only store up to three (3) short messages.
- 98 -
Advertisement
Table of Contents
