At$Obdsav Save Obdii Thresholds To Memory - Novatel MT 3050 At Command Reference

AT$OBDSAV Save OBDII Thresholds To
Memory
AT$OBDSAV
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
Notes
Save OBD2 Thresholds to memory
This command is used to save all of the OBD2 thresholds to flash memory.
AT$OBDSAV=?
OK
N/A
N/A
N/A
N/A
AT$OBDSAV
OK
N/A
N/A
If AT$OBDSAV is not sent, any changes made to OBD or accelerometer
commands are maintained through a reset (AT$RESET), but are lost if the power
is cycled.
- 295 -