AT$GPSVAL GPS Speed Validation
AT$GPSVAL
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<MODE>
<ACC MOTION>
Notes
Examples
GPS Speed Validation
This command is used to turn GPS speed filtering on and off.
AT$GPSVAL=?
$ GPSVAL: (0-1),(0-1)
OK
AT$ GPSVAL =<MODE>,<ACC MOTION>
OK
AT$ GPSVAL?
$ GPSVAL: <MODE>,< ACC MOTION >
OK
N/A
N/A
N/A
0 – Use default for GPS Speed filter
1 – Disable GPS Speed filter
0 – Use accelerometer to determine motion
1 – Do not use accelerometer to determine motion
This parameter is not available to all MT Products.
This field is to enable the use of the accelerometer to assist the GPS filter in
determining motion. This value is not relevant if <MODE> = 1.
The GPS speed filter here is the same as the GPS speed filter in $GPSFLT.
- 324 -