Table of Contents
Advertisement
AT$FTPRST Restart The Last FTP GET
Operation
AT$FTPRST
Command Function
Syntax Query
Response
Write Syntax
Response
Read Syntax
Response
Execute Syntax
Response
Parameter Values
<offset>
Notes
Restart the Last FTP GET Operation
Manual restart of an FTP GET file transfer from the last completed point in the file.
N/A
N/A
AT$FTPRST=<offset>
OK
N/A
N/A
N/A
N/A
Number of bytes into the file to resume file transfer. (Optional)
AT$FTPRST will attempt to resume the last incomplete file transfer from the last
point in the file successfully read. Offset is not required unless the automatically
computed offset is to be overridden. The AT$FTPRST command requires an
RFC3659 compliant FTP server which implements the FTP REST command.
AT$FTPRST is not designed to work over a system restart.
The user's current path must contain the file prior to issuing AT$FTPRST or else
the AT$FTPRST command will fail.
The only time it is necessary to send the $FTPRST command is if a "FTP TIMEOUT"
URC is received during a FTP transfer. The "FTP TIMEOUT" is typically caused by
the loss of the network data connection for more than the FTP idle timeout, 60
seconds.
- 188 -
Advertisement
Table of Contents
