At$Ftpr Outputs Block Of File Data Onto Serial Port - Novatel MT 3050 At Command Reference

AT$FTPR Outputs Block Of File Data Onto
Serial Port
AT$FTPR
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<blocksize>
<available>
Notes
Outputs block of file data onto serial port
Outputs the requested number of bytes of a retrieved file from the remote FTP
server onto the serial port.
AT$FTPR=?
$FTPR: (0-1500)
OK
N/A
N/A
A AT$FTPR?
$FTPR: <available>
AT$FTPR=<blocksize>
OK
NA
Number of bytes to output to serial port. This number is limited to the current
number of bytes of the remote file which have been transferred from the FTP
server.
The number of bytes available for output to the serial port.
This command is only available after an FTP get operation has been initiated
using the serial port as the file destination. It directs buffered file data from the
FTP server to be transmitted in blocks out the serial port. This command is
repetitively issued until the complete file is transmitted from the FTP server out
the serial port.
- 187 -