At$Obdart Set Right Turn Threshold - Novatel MT 3050 At Command Reference

AT$OBDART Set Right Turn Threshold

AT$OBDART
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<ALERT>
<THRHLD>
<SET TIME>
<CLR TIME>
Notes
OBD2 Set Right Turn Threshold
This command is used to set the two right turn accelerometer thresholds.
AT$OBDART=?
$OBDART: (1-2),(0-4000),(1-1000),(1-1000)
OK
AT$OBDART=<ALERT>,<THRHLD>,<SET TIME>,<CLR TIME>
OK or ERROR
AT$OBDART?
$OBDART: <THRLD>,<SET TIME>,<CLR TIME>,<THRLD>,<SET TIME>,<CLRTIME>
N/A
N/A
N/A
Acceleration alert number
Acceleration in milli Gs
0 is the default value and is used to disable that threshold.
Time above threshold to set alert in seconds (default 1)
Time below threshold to clear alert in seconds (default 2)
N/A
- 278 -