At$Rtcrset Rtc Report Reset State - Novatel MT 3050 At Command Reference

AT$RTCRSET RTC Report Reset State

AT$RTCRSET
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<reset state>
Notes
Examples
RTC Report Reset State
This command reports the reset state of the RTC following a power cycle. The
command reports TRUE only if a reset occurred since last power up and last call
to check it. So multiple calls will report the current status only.
N/A
N/A
N/A
N/A
N/A
N/A
AT$RTCRSET?
$RTCRSET : <reset state>
OK
N/A
1 - indicates that a RTC reset occurred,
0 - indicates that a RTC reset did NOT occur
This command returns the current reset state of the RTC since power-up. If
multiple calls are made only current reset state is returned.
Following example shows the check for the RTC being reset since last check of
reset and since last power up, with a response of True.
AT$rtcrset?
$RTCRSET: 1
OK
Following example shows the check for the RTC being reset since last check of
reset and since last power up, with a response of False.
AT$rtcrset?
$RTCRSET: 0
OK
- 193 -